{"title":"Thickness Gauges","description":"\u003cdiv align=\"center\"\u003e\u003cspan style=\"FONT-SIZE: 14pt\"\u003e\u003cspan style=\"FONT-WEIGHT: bold\"\u003eThickness Gauges\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"center\"\u003e\u003cspan style=\"FONT-SIZE: 10pt\"\u003e\u003cspan style=\"font-size: 10pt;\"\u003e(Ultrasonic Thickness Gauges, Wall Thickness Gauges, Coating Thickness Gauges, Coating Thickness Gauge)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eOur Most Popular Models - Select A Sub-Category For More Products\u003c\/span\u003e\u003c\/div\u003e\u003cbr\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cspan style=\"FONT-FAMILY: Arial; FONT-SIZE: 10pt\"\u003eUltrasonic Thickness Gauges or Thickness Gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of high frequency sound through the material being tested. The thickness of metals, plastics, ceramics, glass,coatings and other materials can easily be measured by portable ultrasonic thickness gauges and coating gauges.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cdiv align=\"center\"\u003e\n\u003ca href=\"http:\/\/www.reliabilitydirectstore.com\/kb_results.asp?cat=10\"\u003e\u003cspan style=\"FONT-FAMILY: Arial; FONT-SIZE: 10pt\"\u003e\u003cspan style=\"font-size: 10pt;\" title=\"Knowledge Base Articles\"\u003ePlease Visit our Knowledge Base for more Information on Ultrasonic Inspection!\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"FONT-FAMILY: Arial; FONT-SIZE: 10pt\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","products":[{"product_id":"electromatic-6000ip-series-intergral-probe-models","title":"Electromatic 6000IP Series Coating Thickness Gauge with Built-In Probe","description":"\u003cdiv id=\"productMainInfo\"\u003e\n\u003cdiv id=\"productInfo\"\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0 - 60 mils (1500 µm)\u003cbr\u003e\u003cstrong\u003eRange:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0 - 250 mils (6 mm), 6000-FT1, 6000-FT3 only\u003cbr\u003e\u003cstrong\u003eResolution:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.05 mil \/ 0.1 mil (1 µm \/ 2 µm)\u003cbr\u003e\u003cstrong\u003eResolution:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.5 mil (0.01 mm), 6000-FT1, 6000-FT3 only\u003cbr\u003e\u003cstrong\u003eModels:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6000-F1, 6000-F3, 6000-N1, 6000-N3, 6000-FN1, 6000-FN3, 6000-FT1, 6000-FT3\n\u003cp\u003eThe 6000IP Series General Purpose Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous and or non-ferrous metals accurately and quickly using magnetic and eddy current principles.\u003c\/p\u003e\n\u003cp\u003eThe 6000-IP's Integral Probe design offers maximum convenience and simplicity allowing for one-hand use, eliminating the external probe and cable which can be cumbersome in certain applications.\u003c\/p\u003e\n\u003cp\u003eThe 6000IP is available in Standard (1) or Advanced (3) configuration. The standard model has a monochrome display, 250 reading memory and USB data output. The Advanced model adds a high contrast color LCD display, Scan Mode, Real-Time Graphing Bluetooth output and more.\u003c\/p\u003e\n\u003cp\u003e6000-F1 NSN 6635-01-246-8868\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"freewith-4724-560\"\u003e\u003c\/a\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003cimg src=\"https:\/\/www.checkline.com\/res\/products\/126387\/positector-6000-features.jpg\" alt=\"Positector 6000 Features\" title=\"Positector 6000 Features\" width=\"400px\" height=\"548px\" align=\"right\"\u003e\u003cb\u003eEasy-To-Use\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eReady to measure—no calibration adjustment required for most applications\u003c\/li\u003e\n\u003cli\u003eEnhanced one-handed menu navigation\u003c\/li\u003e\n\u003cli\u003eFlashing display—ideal in a noisy environment\u003c\/li\u003e\n\u003cli\u003eRESET feature instantly restores factory settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eDurable\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent, acid, oil, water and dust resistant - weatherproof\u003c\/li\u003e\n\u003cli\u003eWear-resistant probe tip\u003c\/li\u003e\n\u003cli\u003eShock-absorbing, protective rubber holster with belt clip\u003c\/li\u003e\n\u003cli\u003eTwo year warranty on gage body AND probe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eAccurate\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eCertificate of Calibration showing traceability to NIST or PTB included (Long Form)\u003c\/li\u003e\n\u003cli\u003eBuilt-in temperature compensation ensures measurement accuracy\u003c\/li\u003e\n\u003cli\u003eHi-RES mode increases displayed resolution for use on applications that require greater precision\u003c\/li\u003e\n\u003cli\u003eConforms to national and international standards including ISO and ASTM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eVersatile\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eFully interchangeable probes are compatible with ALL gage bodies\u003c\/li\u003e\n\u003cli\u003eMultiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero\u003c\/li\u003e\n\u003cli\u003eSelectable display languages\u003c\/li\u003e\n\u003cli\u003eHi Contrast backlit display for bright or dark environments\u003c\/li\u003e\n\u003cli\u003eFlip display enables right-side-up viewing\u003c\/li\u003e\n\u003cli\u003eExtended cables available (up to 75 m\/250 ft) for underwater or remote measuring\u003c\/li\u003e\n\u003cli\u003eUses alkaline or rechargeable batteries (built-in charger)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003ePowerful\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eStatistics mode continually displays\/updates average, standard deviation, min\/max thickness and number of readings while measuring\u003c\/li\u003e\n\u003cli\u003eHiLo alarm audibly and visibly alerts when measurements exceed user-specified limits\u003c\/li\u003e\n\u003cli\u003eFAST mode - faster measurement speed for quick inspection\u003c\/li\u003e\n\u003cli\u003eUSB port for fast, simple connection to a PC and to supply continuous power. USB cable included\u003c\/li\u003e\n\u003cli\u003eUSB mass storage - stored readings and graphs can be accessed using universal PC\/ Mac web browsers or file explorers. No software required\u003c\/li\u003e\n\u003cli\u003eEvery stored measurement is date and time stamped\u003c\/li\u003e\n\u003cli\u003eSoftware updates via web keep your gage current\u003c\/li\u003e\n\u003cli\u003eConnects to PosiTector.net\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"freewith-4725-561\"\u003e\u003c\/a\u003e\n\u003ch2\u003eFeature Comparison Chart\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003ctable class=\"table table-striped table-bordered table-hover table-darkHeader table-whiteBorder table-centeredHeader table-noBottomMargin\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature Comparison Chart\u003c\/th\u003e\n\u003cth\u003eBasic (1)\u003c\/th\u003e\n\u003cth\u003eMemory (3)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHi Contrast LCD Display\u003c\/td\u003e\n\u003ctd\u003e\n\u003cimg src=\"https:\/\/www.checkline.com\/res\/products\/126382\/standard-bdy-sm.jpg\"\u003e\u003cbr\u003eColor\u003c\/td\u003e\n\u003ctd\u003e\n\u003cimg src=\"https:\/\/www.checkline.com\/res\/products\/126382\/gage-body-adv-sm.png\"\u003e\u003cbr\u003eColor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFAST mode - faster measurement speed for quick inspection\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCAN Mode - take continuous readings without lifting the probe\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHi-Lo limits audibly and visibly alerts when measurements exceed your specified limits\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstantly calculate average, standard deviation, min\/max thickness and number of readings while measuring\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReading Storage Capacity\u003c\/td\u003e\n\u003ctd\u003e250 in one group\u003c\/td\u003e\n\u003ctd\u003e100,000 in up to 1000 groups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min\/max levels\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePSPC 90\/10 feature determines if a coating system complies with an IMO performance standard for protective coatings\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnscreen help, real time graphing, picture prompting and batch notes\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMultiple stored calibration adjustments for measuring on a variety of substrate conditions\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Technology for data transfer to a PC or optional portable printer\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"glyphicon glyphicon-ok\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"kit\"\u003e\u003c\/a\u003e\n\u003ch2\u003eComplete Kit\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003cdiv class=\"completeKitText\"\u003eALL Gauges are supplied as a complete kit including precision plastic shims, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, instructions, nylon carrying case with shoulder strap, protective lens shield, Long Form Certificate of Calibration showing traceability to NIST or PTB, USB cable, two (2) year warranty.\u003c\/div\u003e\n\u003cdiv class=\"completeKitImage\"\u003e\u003ca href=\"https:\/\/www.checkline.com\/res\/products\/126387\/positector-6000-coating-gauge-kit.jpg\" rel=\"lightbox-kit\" title=\"positector 6000 coating gauge kit\" data-width=\"1200\" data-height=\"1126\" data-pswp-uid=\"9\"\u003e\u003cimg src=\"https:\/\/www.checkline.com\/res\/products\/126387\/positector-6000-coating-gauge-kit.jpg\" class=\"img-responsive\" alt=\"positector 6000 coating gauge kit\" title=\"positector 6000 coating gauge kit\" width=\"180px\" height=\"180px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"freewith-860-84\"\u003e\u003c\/a\u003e\n\u003ch2\u003eProbe Specifications\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003cdiv class=\"container-fluid\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-xs-12 col-md-2\"\u003e\u003ca href=\"https:\/\/www.checkline.com\/res\/products\/126410\/positector_6000_integral_probes_dimensional_drawing.gif\" rel=\"lightbox-integral\" alt=\"Positector 6000 Integral Probes Dimensional Drawing - F, N, FN, FT\" title=\"Positector 6000 Integral Probes Dimensional Drawing - F, N, FN, FT\" data-width=\"246\" data-height=\"489\" data-pswp-uid=\"10\"\u003e\u003cimg class=\"img-responsive center-block\" src=\"https:\/\/www.checkline.com\/res\/products\/126410\/positector_6000_integral_probes_dimensional_drawing.gif\" alt=\"Positector 6000 Integral Probes Dimensional Drawing - F, N, FN, FT\" title=\"Positector 6000 Integral Probes Dimensional Drawing - F, N, FN, FT\" width=\"150px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12 col-md-10 pad-0\"\u003e\n\u003ctable class=\"table table-striped table-bordered table-hover table-darkHeader table-whiteBorder\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"text-right\"\u003eProbe Model:\u003c\/th\u003e\n\u003cth class=\"text-center\"\u003eF\u003c\/th\u003e\n\u003cth class=\"text-center\"\u003eN\u003c\/th\u003e\n\u003cth class=\"text-center\"\u003eFN\u003c\/th\u003e\n\u003cth class=\"text-center\"\u003eFT\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"2\" class=\"text-right table-cell-vam\"\u003eRange:\u003c\/th\u003e\n\u003ctd colspan=\"3\" class=\"text-center  table-cell-vam\"\u003e0 - 60 mils\u003c\/td\u003e\n\u003ctd class=\"text-center  table-cell-vam\"\u003e0 - 250 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" class=\"text-center  table-cell-vam\"\u003e0 - 1500 µm\u003c\/td\u003e\n\u003ctd class=\"text-center  table-cell-vam\"\u003e0 - 6 mm\u003cbr\u003e0 - 6000 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"2\" class=\"text-right table-cell-vam\"\u003e*Accuracy:\u003c\/th\u003e\n\u003ctd colspan=\"3\" class=\"text-center  table-cell-vam\"\u003e± (0.05 mils + 1%) 0 - 2 mils\u003cbr\u003e± (0.1 mils + 1%) \u0026gt; 2 mils\u003c\/td\u003e\n\u003ctd class=\"text-center  table-cell-vam\"\u003e± (0.5 mils + 1%) 0 - 100 mils\u003cbr\u003e± (0.5 mil + 3%) \u0026gt; 100 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" class=\"text-center  table-cell-vam\"\u003e± (1 µm + 1%) 0 - 50 µm\u003cbr\u003e± (2 µm + 1%) \u0026gt; 50 µm\u003c\/td\u003e\n\u003ctd class=\"text-center  table-cell-vam\"\u003e± (0.01 mm + 1%) 0 - 2.5 mm\u003cbr\u003e± (0.01 mm + 3%) \u0026gt; 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"specifications\"\u003e\u003c\/a\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003ctable id=\"specificationsTable\" class=\"table table-striped table-bordered table-hover table-darkHeader table-whiteBorder table-centeredHeader table-noBottomMargin\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eMeasuring principle:\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003emagnetic induction principle (Ferrous)\u003cbr\u003eeddy-current principle (Non-Ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eDisplay\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003eBacklit \u0026amp; Reversible LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eData Output\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003eIR \u0026amp; USB - \"2\" \u0026amp; \"3\" Models\u003cbr\u003eBluetooth - \"3\" Models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eSurface Temp.\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003eMaximum 120 °F \/ 49 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003ePower\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003e3 AAA batteries, Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eDimensions\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003e5.75\" x 2.5\" x 1.2\" (146 x 64 x 31 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003e5.8 oz. (165 g) without batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eProtection Class\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003eMeets or exceeds IP5X, Solvent, acid, oil, water \u0026amp; dust resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eWarranty\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003e2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specificationsTableLabel\"\u003eCalibration Certificate\u003c\/td\u003e\n\u003ctd class=\"specificationsTableSpec\"\u003eCertificate of Calibration showing traceability to NIST or PTB included (Long Form)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"moduleContainer\"\u003e\n\u003cdiv class=\"divider\"\u003e\n\u003ca name=\"freewith-6829-1035\"\u003e\u003c\/a\u003e\n\u003ch2\u003eFAQ's (Frequently Asked Questions)\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"moduleData\"\u003e\n\u003cb\u003eIs the PosiTector 6000 calibrated at the factory?\u003c\/b\u003e\u003cbr\u003ePosiTector 6000 instruments arrive fully calibrated and include a Long-Form Certificate of Calibration traceable to NIST or PTB. The Certificate of Calibration documents actual readings taken by your instrument at our calibration laboratory, on standards traceable to a national metrology institute. Beware of ‘Certificates’ or ‘Certificates of Conformance’ offered by competitors. These typically do not include actual instrument readings, and are often insufficient to meet common quality requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDoes the PosiTector 6000 need to be ‘calibrated’ or ‘adjusted prior’ prior to use? Do I need to perform a two-point adjustment prior to measuring?\u003c\/b\u003e\u003cbr\u003eThe innovative probe technology and factory calibration in the PosiTector 6000 means that it arrives ready-to-measure — usually there is no need to perform a two-point calibration adjustment. Ruby or alumina probe tips on standard probe models eliminate wear, meaning that the factory calibration is maintained throughout the lifetime of the probe. Whether out of the box or after years of use, PosiTector 6000 will continue to provide accurate results.\u003cbr\u003eFor highest confidence and best measurement accuracy, observe our “golden rule” — simply check ZERO (or the known thickness of a shim) on the uncoated part, adjust if necessary, and then measure the coated part. This ensures that the probe is properly adjusted for substrate characteristics including mass, metallurgy, curvature, temperature and roughness.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDo your instruments require any formal training for use? Do you offer ‘demo’ models?\u003c\/b\u003e\u003cbr\u003eNo. Our instruments are designed for simple operation, feature easy-to-use menus, both full and quick instruction manuals, and helpful videos. In lieu of demonstration models, we provide unlimited technical support via telephone and\/or email, and a limited 30-day money back guarantee.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow often should the PosiTector 6000 be recalibrated?\u003c\/b\u003e\u003cbr\u003ePosiTector 6000 probes include a Certificate of Calibration with no expiry or end date. They have no shelf life, therefore the length of time in the field is not a good indicator for recalibration intervals. Many organizations with quality programs and recertification programs require annual recalibrations, and this is a good starting point for most users. Manufacturers recommend that customers establish calibration intervals based upon their own experience and work environment. Based on our product knowledge, data and customer feedback, a one year calibration interval from the date the instrument was placed in service is a good starting point.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can the PosiTector 6000 measure?\u003c\/b\u003e\u003cbr\u003ePosiTector 6000 probes have different capabilities depending on the model.\u003cbr\u003e-‘Ferrous’ model probes (order code beginning in ‘F’ ex. FS1) can measure non-magnetic coatings applied to ferrous (magnetic) metals, typically carbon steel.\u003cbr\u003e-Non-ferrous’ model probes (order code beginning in ‘N’ ex. NRS3) can measure non-conductive coatings applied to non-ferrous metals.\u003cbr\u003e‘Combination' model probes (order code beginning in ‘FN’ ex. FNTS1) can measure non-magnetic coatings applied to ferrous (magnetic) metals, AND non-conductive coatings applied to non-ferrous metals\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIs the PosiTector affected by the surface roughness (profile) of the metal substrate below the coating?\u003c\/b\u003e\u003cbr\u003eAll coating thickness gages are influenced to some degree by substrate roughness, as shown in the below image. It is generally accepted that coating thickness should be measured from the highest ‘peaks’ in the rough surface thus ensuring they are covered by the protective coating. However, coating thickness gages will instead measure the coating thickness from the ‘effective magnetic plane, which is located somewhere between the highest peaks and deepest valleys of the profile.\u003cbr\u003eSSPC-PA 2 proposes several solutions depending upon the instrument type and the particular situation. Similar methods are suggested by ASTM D7091 and ISO 19840. One option is to verify the gage reads zero on the uncoated steel substrate, and adjust to zero if necessary. This is a popular solution when the metal surface is relatively smooth.\u003cbr\u003eSince it is difficult to ensure that the probe tip is sitting on the highest peaks of the surface profile, another option is to place a plastic shim of a known thickness that is close to the expected thickness of the applied coating between the probe and substrate and adjust to the stated thickness of the shim- referred to as a 1-point adjustment. The plastic shim sits on the peaks of the surface profile over a greater area than the probe tip, ensuring that the adjustment is being taken ‘over the peaks’. This best simulates a coating covering the peaks of the surface profile.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCan the PosiTector 6000 measure coatings on stainless steel?\u003c\/b\u003e\u003cbr\u003e\"Stainless steel\" is a term used to generally categorize a wide variety of corrosion and heat-resistant alloys. In specific terms of metallurgy, a “stainless steel” is any iron-based alloy containing a minimum of 10.5% chromium content by mass. Some stainless steel alloys have a relatively low magnetic response (often called “partially\/weakly magnetic”). Others have no magnetic response whatsoever, and some possess a ferromagnetic response similar to carbon steel.\u003cbr\u003eThe PosiTector 6000 is uniquely able to measure partially magnetic stainless steel alloys, an application that is challenging for many competitive instruments. PosiTector 6000 FN (combination ferrous\/non-ferrous) probe models can often measure consistently on partially magnetic substrates with a simple Zero adjustment. For more challenging applications, the “N-Lock” measurement mode permits accurate measurement of non-conductive coatings applied to partially magnetic substrates.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCan the PosiTector 6000 measure coatings on hot surfaces?\u003c\/b\u003e\u003cbr\u003eThe PosiTector 6000 FHXS Xtreme is ideal for measuring coating thickness on hot and\/or rough surfaces (250°C, 500°F maximum). All PosiTector 6000 probe are capable of measuring on hot surfaces. Standard probe models can operate at environments up to 50°C (120°F). However, if the probe is lifted clear of the surface as soon as a reading is taken and is allowed to cool, measurements can be taken at higher temperatures. Simply ensure that the probe remains at a temperature of less than 50°C (120°F), and cool enough to handle with an unprotected hand.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat is the minimum part size required to take a reading?\u003c\/b\u003e\u003cbr\u003eTo ensure a part’s dimensions are suitable for a PosiTector 6000 probe, simply check ZERO on the uncoated part and adjust if necessary. Verify accuracy by measuring a plastic shim placed on the uncoated part. If the measurement is within the combined tolerances of the shim and probe, the probe is suitable for measuring the coated part.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCan the PosiTector 6000 be used underwater?\u003c\/b\u003e\u003cbr\u003eWhile the PosiTector gage body and probe connector are not suitable for immersion in water, PosiTector 6000 regular cabled probes are hermetically sealed and ideal for underwater use. Extended cables are available (up to 75 m\/250 ft) for underwater or remote measuring.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIs the PosiTector 6000 intrinsically safe?\u003c\/b\u003e\u003cbr\u003eWhile the PosiTector 6000 is not designed as an intrinsically safe device, our PosiTest mechanical gages are ideal for measuring coating thickness in hazardous operating environments.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCan the PosiTector 6000 measure nickel on steel?\u003c\/b\u003e\u003cbr\u003eYes, but it depends upon the particular type of nickel coating that has been applied to the steel.\u003cbr\u003e\u003cbr\u003e-When nickel plating is deposited by a process of electrolysis (employing an electric current in the nickel bath), the resultant coating – commonly called “e-nickel” – is always conductive and magnetic to some degree and cannot be accurately measured by our gages when applied to ferrous or non-ferrous metals.\u003cbr\u003e-Electroless nickel coatings are deposited by an autocatalytic process which does not involve the addition of an electric current. If the nickel bath in this process contains a minimum concentration of ~8% phosphorus, the resulting nickel plating is effectively non-magnetic and its thickness can be accurately measured on ferrous steel with a magnetic principle coating thickness gage such as a PosiTector 6000 F model.\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Electromatic","offers":[{"title":"6000-F1: Standard Display, Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256738516,"sku":"ELE-6000-F1","price":740.0,"currency_code":"USD","in_stock":true},{"title":"6000-F3: Advanced Display, Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256771284,"sku":"ELE-6000-F3","price":1215.0,"currency_code":"USD","in_stock":true},{"title":"6000-N1: Standard Display, Non-Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256935124,"sku":"ELE-6000-N1","price":820.0,"currency_code":"USD","in_stock":true},{"title":"6000-N3: Advanced Display, Non-Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256967892,"sku":"ELE-6000-N3","price":1295.0,"currency_code":"USD","in_stock":true},{"title":"6000-FN1: Standard Display, Ferrous \u0026 Non-Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256804052,"sku":"ELE-6000-FN1","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"6000-FN3: Advanced Display, Ferrous \u0026 Non-Ferrous, 0-60 mils \/ 1500 µm","offer_id":48358256836820,"sku":"ELE-6000-FN3","price":1625.0,"currency_code":"USD","in_stock":true},{"title":"6000-FT1: Standard Display, Ferrous, 0-250 mils \/ 6 mm","offer_id":48358256869588,"sku":"ELE-6000-FT1","price":860.0,"currency_code":"USD","in_stock":true},{"title":"6000-FT3: Advanced Display, Ferrous, 0-250 mils \/ 6 mm","offer_id":48358256902356,"sku":"ELE-6000-FT3","price":1335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/0451\/2724\/files\/ELE-6000IP-2_73ffe8be-3374-4915-8188-459073ab985b.jpg?v=1785179448"},{"product_id":"check-line-ti-25mx-ultrasonic-wall-thickness-gauge","title":"Check-Line TI-25MX Ultrasonic Wall Thickness Gauge","description":"Check-Line TI-25MX Ultrasonic Wall Thickness Gauge\u003cbr\u003e","brand":"Electromatic","offers":[{"title":"Default Title","offer_id":48343312466132,"sku":"ELE-TI-25MX","price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/0451\/2724\/files\/ELE-TI-25MX-2.jpg?v=1785143303"},{"product_id":"check-line-ti-pvx-graphical-high-precision-a-b-scanning-ultrasonic-wall-thickness-gauge","title":"Check-Line TI-PVX Graphical High-Precision A \u0026 B Scanning Ultrasonic Wall Thickness Gauge","description":"\u003cdiv\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eTI-PVX Precision Ultrasonic Wall thickness gauge\u003c\/span\u003e provides the flexibility necessary for both high resolution and penetration requirements. \u003cbr\u003e\u003cbr\u003eIt's ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications) makes it the perfect flexible tool for very precise and delicate measurements. The adjustable resolution settings add to the PVX's flexibility. \u003cbr\u003e\u003cbr\u003eThe selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +\/- Rectified waveform, and Large Digits with Scan Bar. \u003cbr\u003e\u003cbr\u003eThe time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material. \u003cbr\u003e\u003cbr\u003eThe high speed scan feature speeds up the inspection process by making 32 measurements per second. \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eStandard Delay Line (acrylic and graphite tips for metals and thin plastics), \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePencil Delay Line (tough access area on thin materials), and \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eContact transducers (variety of applications)  \u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eThe adjustable resolution settings add to the PVX's flexibilty. The selectable viewing options provide the user with additional flexibility during operation: \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eRF waveform, \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e+\/- Rectified waveform, and \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eLarge Digits with Scan Bar. \u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"FONT-WEIGHT: bold\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material. \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned. \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eHardware AGC gain control for multiple echo and thru-paint measurement.  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eMultiple calibration options: One Point, Two Point, or selection from a Material List.  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.   \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eAuto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view.  Adjustable resolution settings  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eVisual and audible alarm with hi and lo limit settings for specific application tolerances. \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePVX comes complete with our Windows® PC software for transferring data to and from a PC.  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e2 year limited warranty   \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eCE Certified  \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eIncludes NIST traceable calibration certificate \u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan style=\"FONT-WEIGHT: bold\"\u003eThe TI-PVX is supplied as a complete kit including:\u003c\/span\u003e\u003cimg align=\"right\" alt=\"Supplied as a Complete Kit\" border=\"0\" src=\"https:\/\/www.reliabilitydirectstore.com\/v\/vspfiles\/assets\/images\/ti-pvx.jpg\"\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cdiv\u003ePVX Gauge\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e3\/16\" 10Mhz transducer\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e4 oz. bottle of coupling fluid\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e2 AA batteries, \u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eNIST-Traceable Calibration Certificate, \u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eData transfer software \u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eSerial output cable \u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eOperating Instruction Manual \u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003eFoam-fitted carrying case.\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Electromatic","offers":[{"title":"Default Title","offer_id":48343314858196,"sku":"ELE-TI-PVX","price":3525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/0451\/2724\/files\/ELE-TI-PVX-2.jpg?v=1785143828"},{"product_id":"extech-tkg100-ultrasonic-thickness-gauge","title":"Extech TKG100 Ultrasonic Thickness Gauge","description":"\u003cb\u003eExtech TKG100\u003c\/b\u003e is designed for making non-destructive measurements of \nwall thickness on primarily steel structures.  TKG-100 provides a monochrome \nthickness readout. The TKG100 kit includes 2oz bottle of couplant, 2 AA \nbatteries, transducer with potted cable, and hard case.\n \u003cbr\u003eThe hold mode retains the last thickness\n\treading with reverse video display. The freeze mode freezes the display\n which is ideal for high temperature readings. The TKG100\n\tbeeps and flashes the display as well as keypad illumination.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSunlight readable dot-matrix display with backlight\u003c\/li\u003e\n\u003cli\u003eWide measurement range:\n\t\u003cul\u003e\n\u003cli\u003e5MHz probe: 0.040\" to 20\" of steel\u003c\/li\u003e\n\u003cli\u003e10MHz probe: 0.020” to 20\" of steel (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple transducer options for high temperature and difficult to measure materials\u003c\/li\u003e\n\u003cli\u003eFast minimum feature to capture minimum thicknesses\u003c\/li\u003e\n\u003cli\u003eComplete with 2oz bottle of couplant, 2 AA batteries, 5MHz Transducer, and hard carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eBoiler Tubes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nPressure Vessels\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nStorage Tanks\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nShip Hulls\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eContainers\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nHome Oil Tanks\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nPipes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nSteam Lines\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eCompressors\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nShafts\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nBridge Pins\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nBond Inspection\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cbr\u003e \u003cbr\u003e","brand":"Extech Instruments Corp.","offers":[{"title":"Default Title","offer_id":48343348576468,"sku":"EXT-TKG100","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/0451\/2724\/files\/EXT-TKG100-2.jpg?v=1785144553"},{"product_id":"extech-tkg150-digital-ultrasonic-datalogging-thickness-gauge","title":"Extech TKG150 Digital Ultrasonic Datalogging Thickness Gauge","description":"\u003cb\u003eExtech TKG150\u003c\/b\u003e is designed for making non-destructive measurements of \nwall thickness on primarily steel structures. The Echo to Echo\n\tfunction measures the metal thickness only. The differential mode displays the difference from the actual thickness\n\tmeasurement and a user entered reference value. The TKG150 also features velocity mode with displays acoustic sound \n\tspeed.\n\u003cbr\u003e\u003cbr\u003eThe TKG150 kit comes complete with protective holster, 2oz bottle of couplant, 2 AA \nbatteries, 5MHz Transducer, hard carrying case, USB cable and XPorter \nsoftware\u003cbr\u003e.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eEcho to Echo option to reduce coating errors\u003c\/li\u003e\n\u003cli\u003eB-scan (visual cross section of test piece)\u003c\/li\u003e\n\u003cli\u003eVibrates on alarm\u003c\/li\u003e\n\u003cli\u003eWide measurement range:\n\t\u003cul\u003e\n\u003cli\u003e5MHz probe: 0.040\" to 20\" of steel\u003c\/li\u003e\n\u003cli\u003e10MHz probe: 0.020” to 20\" of steel (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSunlight readable dot-matrix display with backlight\u003c\/li\u003e\n\u003cli\u003e100K internal datalogger with export to Excel\u003c\/li\u003e\n\u003cli\u003eMultiple transducer options for high temperature and difficult to measure materials\u003c\/li\u003e\n\u003cli\u003eFast minimum feature to capture minimum thicknesses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eBoiler Tubes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nPressure Vessels\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nStorage Tanks\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nShip Hulls\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eContainers\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nHome Oil Tanks\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nPipes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nSteam Lines\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eCompressors\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nShafts\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nBridge Pins\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003e\nBond Inspection\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cbr\u003e \u003cbr\u003e","brand":"Extech Instruments Corp.","offers":[{"title":"Default Title","offer_id":48343348609236,"sku":"EXT-TKG150","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/0451\/2724\/files\/EXT-TKG150-2.jpg?v=1785144554"},{"product_id":"thickness-gauge-pce-tg-300","title":"Thickness Gauge PCE-TG 300","description":"Thickness gauge PCE-TG 300 Large measuring range \/ Up to 600 mm \/ Pulse-echo or echo-echo mode \/ ; For all homogeneous materials \/ Print function via Bluetooth \/ USB connection\u003cbr\u003e\u003cbr\u003e","brand":"PCE Instruments","offers":[{"title":"Default Title","offer_id":48343418503380,"sku":"PCE-TG 300","price":1551.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ultrasonic-thickness-meter-pce-tg-100","title":"Ultrasonic Thickness Meter PCE-TG 100","description":"Material Thickness Meter PCE-TG 100 Thickness meter for homogeneous materials, Ultrasonic speed adjustable, Internal calibration standard, Measuring range up to 225 mm \/ 8.86 in ; (displays in mm only) \u003cbr\u003e\u003cbr\u003e","brand":"PCE Instruments","offers":[{"title":"Default Title","offer_id":48343418536148,"sku":"PCE-TG 100","price":911.0,"currency_code":"USD","in_stock":true}]},{"product_id":"thickness-meter-pce-tg-110","title":"Thickness Meter PCE-TG 110","description":"Material thickness meter for various materials, such as metals, glass, homogeneous plastics   , (with external probe for temperatures up to 400 degreeC \/ 752 degreeF); (displays in mm only)\u003cbr\u003e\u003cbr\u003e","brand":"PCE Instruments","offers":[{"title":"Default Title","offer_id":48343418568916,"sku":"PCE-TG 110","price":1284.0,"currency_code":"USD","in_stock":true}]},{"product_id":"thickness-meter-pce-tg-120","title":"Thickness Meter PCE-TG 120","description":"Material Thickness Meter PCE-TG 120 Thickness meter for homogeneous materials \/ With special test probe for edges and thin tubes \/ Adjustable ultrasonic speed \/ Easy operation \/ May only be used on a clean and flat surface \/ Not suitable for welding\u003cbr\u003e\u003cbr\u003e","brand":"PCE Instruments","offers":[{"title":"Default Title","offer_id":48343418601684,"sku":"PCE-TG 120","price":981.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ultrasonic-material-thickness-meter-pce-tg-50","title":"Ultrasonic Material Thickness Meter PCE-TG 50","description":"PCE-TG 50 Ultrasonic Material Thickness Meter Portable handheld thickness gauge with a measuring range of 1.2   200.0 mm \/ 0.05   7.87 inches (steel) and adjustable ultrasound speed \/ velocity\u003cbr\u003e\u003cbr\u003e","brand":"PCE Instruments","offers":[{"title":"Default Title","offer_id":48343418699988,"sku":"PCE-TG 50","price":858.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/sejqw6-v1.myshopify.com\/collections\/thickness-gauges.oembed","provider":"Reliability Direct Store, LLC","version":"1.0","type":"link"}