STI Vibration Monitoring, Inc.

CMCP-TACH3-XP Explosion Proof Tachometer

$1,950.00

SKU: CMCP-TACH3-XP-AC-00

Request a Quote

✓ Authorized Dealer ✓ 7-Day Returns ✓ Expert Support

Description

Specifications

Shipping & Returns

Downloads

The CMCP-TACH3-XP is front panel programmable for single or multiple pulses per revolution and scaling. It may be used as a Tachometer, Ratemeter, Counter or Totalizer. The CMCP-TACH3-XP offers a fixed or floating decimal point and can be supplied with remote optical, infrared, laser, proximity, magnetic pickup, or eddy current probe sensors. It is directly compatible with a TTL input and 200mV to 50 Vac signal. The CMCP-TACH3-XP has front panel programmable alarm set points, 4-20mA, 0-5 Vdc, TTL and RS232 outputs.

Specifications

CMCP-TACH-3 Specifications

Speed Range	5 to 999,990 RPM (single pulse per revolution), 0.5 to 999,990 RPM (10 pulses per revolution). Speeds below 5 RPM are possible with multiple pulses per revolution
Input Frequency Range	0.083 Hz to 250 kHz
Totalizer/Counter	Display Range: 0.001 to 99,999 (Only top 5 digits are shown for 100,000-999,990) Max # of counts = 16,777,216 even with 0.001 scale
Input Configuration	Universal Inputs: 1 to 9,999 pulses per revolution, front panel push button programmable TTL input and 1.1V to 50vac signals, Opt: -1 to – 50Vdc
Accuracy	±0.001% of reading or ±1 displayed resolution (Standard Gate), ±0.01% of reading or ±1 displayed resolution (Fast Gate).
Resolution	Up to 0.001 RPM, 10 RPM (100,000 to 999,990 RPM).
Display	5 digit, 0.56” (14 mm) high red LED.
Display Update	Menu Selectable between: 0.5 second above 120 RPM, 1 second above 60 RPM and 1.5 seconds above 40 RPM.
Max Measurement Rate	Up to 100 times per second (Standard Gate) or up to 1000 (Fast Gate) dependent on input frequency. Input must be > measurement rate.
Scaling	Programmable scaling: 0.0001 to 9999.9 (front panel push button programmable).
Decimal Point	User Selectable (0-3) decimal places max (front panel push button programmable).
Memory	Maximum, minimum and last reading recall from front panel push buttons.
Dimensions	1/8 DIN by 4.5” (114 mm) deep. Panel cutout: 3.58” x 1.74” (91 x 44mm)
Input Power	Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±20%, Isolated, 6.0 Watts.
Inputs	Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac input. Standard input is 1 pulse per revolution.
Sensor Excitation	5Vdc or optional 12Vdc or 24Vdc to sensor.
Recommended Sensors	Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200
Pulse Repeater Output	Standard, 0 to 5 V TTL compatible. One pulse out for each pulse in. Menu selectable polarity.
Communications	Bi-directional RS232C, USB or Ethernet interface.
Analog Output	Voltage (AO): 0 to 5 Vdc, 5mA max load (isolated or non-isolated) or Current (IO): 4 to 20mA, 500Ω max load. (isolated or non-isolated), 1 to 5Vdc possible using 250Ω resistor) 16 bit resolution. Front panel push button programmable for full scale and offset RPM ranges.
Alarm Capability	Two alarm set points: High or Low alarm limits, Latching or Non-Latching, Front panel push button programmable Hysteresis, dead band and low limit lockout are programmable, Relays can be set as failsafe. Alarms can be reset Manually or Automatically. Remote reset via auxiliary input.
Alarm Outputs	Two Form C relay contacts, rated 1A at 115Vac or 230Vac
Remote Programming	Unit can be remotely programmed using optional communications interface and PM Remote Software.
Environmental	Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C.
Electrical Safety	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC

Shipping

Carriers	UPS or FedEx for domestic orders; FedEx for international orders
Shipping cost	Calculated automatically at checkout for US orders. International orders require a complete ship-to address with postal code.
Freight terms	FOB shipping point, freight prepaid. Title passes to the buyer at the vendor's dock.
Hazardous items	Epoxy adhesives, batteries and paint markers cannot ship by air freight
International	Shipping fees do not include taxes, tariffs or duties

Returns

Return window	7 calendar days from delivery. Contact us before returning any item.
Condition	New, unaltered and unused. Special and custom orders are not returnable.
Restocking fee	15% on non-defective items that are not being exchanged
Full policy	Refund / Return Policy

See our Shipping & Billing Terms for how estimated shipping is charged, and our Refund / Return Policy.

Questions about shipping on this item? Call (214) 238-0493 or contact us.