STI Vibration Monitoring, Inc.
CMCP-TKAT Accelerometer and Cable Tester
$595.00
SKU: CMCP-TKAT
Request a Quote✓ Authorized Dealer
✓ 7-Day Returns
✓ Expert Support
Description
Specifications
Shipping & Returns
Downloads
The CMCP-TKAT Cable & Bias
Checker is a battery powered, hand-held unit designed to enable
installation engineers to verify plant cabling in vibration monitoring
systems. The unit provides constant current accelerometer power via a
BNC connector and indicates correct accelerometer operation or cabling
short /open circuits using a tri-color LED. In addition, the
accelerometer bias voltage is indicated on an LCD display. The battery
compartment, containing a single 9V battery, is accessible on removing
the rubber protective cover.
Features:
Features:
- Verifies Sensor Bias Voltage
- Verifies Cable Wiring
- LED Voltage Display
- OK, Short or Open LED Indicators
- 9V Battery Powered
- BNC Cable For Direct Connection
- Test Leads for Junction Boxes
- Includes Carry Case and Spare Battery
|
Technical Performance
Operation The CMCP-TKAT can be connected to multi-channel switch boxes via a BNC/ BNC coaxial lead, or to junction box terminals by use of the BNC lead adapter and the test probes provided. The center BNC contact should be connected to the accelerometer power/signal wire and the BNC outer to the accelerometer 0V. On switching on via the toggle switch, the LCD meter will indicate accelerometer bias voltage. The LED will be green if this bias voltage is between 5V and 15V. Bias voltages outside these limits indicate a faulty accelerometer. The LED will be amber for bias voltages less than 5V and red for bias voltages greater than 15V. Cable short-circuits are indicated by an amber LED and 0V on the LCD meter. Open circuits are indicated by a red LED and a bias voltage greater than 20V. The battery current is 35mA in normal operation which will allow many hours of continuous operation, however to preserve battery life, the unit should be switched off when not in use. A low battery condition is indicated on the LCD display when the battery voltage falls below 7.5V. The LCD display can be calibrated, if required, via a potentiometer located on the rear of the display module. This is accessible on removal of the four case fixing screws. |
Contact us at (214) 238-0493 for full specifications.
Shipping
| Carriers | UPS or FedEx for domestic orders; FedEx for international orders |
|---|---|
| Shipping cost | Calculated automatically at checkout for US orders. International orders require a complete ship-to address with postal code. |
| Freight terms | FOB shipping point, freight prepaid. Title passes to the buyer at the vendor's dock. |
| Hazardous items | Epoxy adhesives, batteries and paint markers cannot ship by air freight |
| International | Shipping fees do not include taxes, tariffs or duties |
Returns
| Return window | 7 calendar days from delivery. Contact us before returning any item. |
|---|---|
| Condition | New, unaltered and unused. Special and custom orders are not returnable. |
| Restocking fee | 15% on non-defective items that are not being exchanged |
| Full policy | Refund / Return Policy |
See our Shipping & Billing Terms for how estimated shipping is charged, and our Refund / Return Policy.
Questions about shipping on this item? Call (214) 238-0493 or contact us.